TV-500 4 Axis Drilling and Tapping CNC Machining Center CNC Machine
Product Description
The machine has a safe and convenient operation design. The back of the machine has a box-shaped design and it is equipped with a tank collecting box. The humanized space design and the wide operating door make the loading and unloading of the workpiece very convenient. This machine is also equipped with easy to use operating panel and hand wheel and high efficiency base chip washing system, making the work more efficient. The spindle motor and the spindle are designed to be directly connected, so there is no noise and vibration problem because there is no belt. The machine is equipped with a low-inertia spindle motor, which makes the acceleration time very short, from 0 to 12000RPM in one second. The Thermal Isolated Direct Drive System can effectively block the heat transmission of the motor to the spindle, and can significantly reduce the heat of the spindle.
Product Parameters
| ITEM | MODELS | TV500 |
| WORKTABLE (WIDTH*LENGTH) | mm | 650*420 |
| DISTANCE BETWEEN T SLOTS | mm | 14*3*100 |
| MAX LOAD BEARING OF WORKTABLE | kg | 200 |
| X/Y/Z AXIS TRAVEL | mm | 510/400/350 |
| DISTANCE FROM SPINDLE NOSE TOWORKBENCH | mm | 130-480 |
| SPINDLE HOLE TAPER | BT30 | |
| SPINDLE SPEED RANGE | r/min | 12000 |
| TRANSMISSION OF SPINDLE BOX | BELT/DIRECT | Optional |
| SPINDLE MOTOR POWER | kW | 3.7/5.5( Mitsubishi) /5.5/7.5(Fanuc) |
| X/Y/Z RAPID FEED SPEED | m/min | 48/48/60(60/60/60) |
| MAX CUTTING FEED SPEED | mm/min | 1-20000 |
| TOOLS MAGAZINE CAPACITY | pcs | 14()16/18/21() |
| FULL TOOLS MAX TOOL DIAMETER | mm | ∅80/∅120 |
| MAX.TOOLS ALLOWABLE WEIGHT | kg | 3.5 |
| MAX.TOOLS ALLOWABLE LENGTH | mm | 200 |
| TOOL CHANGE TIME | sec | 1.8 |
| COOLING PUMP FLOW RATE | L/min | 200 |
| X/Y/Z POSITION ACCURACY | mm | ±0.005 |
| X/Y/Z RE-POSITION ACCURACY | mm | ±0.003 |
| MACHINE DIMENSION | mm | 1540*270*2500 |
MACHINE WEIGHT | kg | 1500 |
AIR PRESSURE | kg/cm2 | 7 |
Standard Configuration for TV Series
Full Cover shield / Self-lubrication system / Working lights / Warning lights / Working condition warning lights / Self-powered electrical shutoff system / Clean air gun/ Water Tank / Transformer / Spindle air curtain and dust control system / Rigid Tapping / Worktable cleaning water gun
Optional Configuration TV Series
NC rotary table (4 Axis) / CTS / Tool detection system / Automatic tool length measurement and damage detection / 3 Axis Linear Scale / Disc type oil-water separator / Crawler chips remover / Direct connection spindle / Spindle oil cooler
FAQ
What is the maximum drilling and tapping capacity of the machine?
The machine is capable of drilling and tapping operations within a specified range, which can be customized based on requirements.
- Can the machine handle different types of materials?
Yes, the CNC Drill Tap Machine is designed to handle a variety of materials, including metals, plastics, and composites. - What is the maximum spindle speed of the machine
The machine offers a high-speed spindle with adjustable speed settings to accommodate different drilling and tapping requirements. - Is the machine equipped with a coolant system?
Yes, the machine has a programmable coolant system that helps with chip evacuation and tool cooling during machining. - Can the machine be integrated into an existing production line?
Yes, the CNC Drill Tap Machine can be integrated into an existing production line or used as a standalone unit.
Send Message